Content of article, Silicone face cleansing brush for sale
What is a Silicone face cleansing brush for sale? In 2021, this is one of the best beauty products that have gained extreme popularity.
- The principle of selectivity of ablation lasers
- Also, Types of ablative effects
- Types of ablative lasers for skin resurfacing
- Moreover, Features of the use of CO2 lasers for face resurfacing
- Features and benefits of fractional ablative photothermolysis
- Furthermore, Stages of laser skin resurfacing
- Does laser Silicone face cleansing brush for saleresurfacing hurt?
- The recovery period after laser skin resurfacing
What is laser skin resurfacing?
Laser face resurfacing is a method of radical renewal of the upper layer of the skin. It is removed along with signs of photo-, chrono-aging and aesthetic defects. However, Subsequent regeneration allows you to restore the top layer of the skin, providing a pronounced lifting and rejuvenation effect.
The skin of the face becomes smooth, healthy, and radiates youth. Today we are talking about how to achieve such a result. Laser Silicone face cleansing brush for sale resurfacing is the process of ablation (removal, vaporization) of the upper layer of the skin to the depth of penetration of the laser beam.
Laser radiation effects on skin
Ablation is achieved using high-intensity laser radiation, the energy of which is absorbed by the water contained in the skin cells. In this case, instantaneous evaporation of water occurs, along with which a micro-area of the skin is evaporated. However, at first glance, it may seem that something terrible and irreversible is happening to the Silicone face cleansing brush for sale.
However, laser radiation common ablation of the skin at the cellular level and an ultra-shallow depth. Furthermore, At the same time, the underlying tissues undergo slight heating, which makes it possible to stimulate the interstitial processes of regeneration and restoration of the loss due to vaporization of the upper layer of the skin.
Temperature exposure to reach the ablation threshold
Laser resurfacing not only removes the top layer of the skin but also activates neocollagenesis. In this case, we are dealing with an almost equal ratio of vaporization and coagulation of old collagen, which is due to temperature exposure to reach the ablation threshold.
37.5-39 ° C - stimulation of interstitial processes.
40-45 ° С - denaturation of protein structures.
60 ° C - coagulation of protein structures.
100 ° С - active evaporation of water.
150 ° С - carbonization process.
300 ° C - ablation.
To instantly reach the ablation threshold, special cosmetic equipment is common - ablation lasers.
The principle of selectivity of ablation lasers
Ablative lasers work on the principle of selectivity - they create light radiation, the spectrum of which is located at the peak of absorption of its energy by Silicone face cleansing brush for sale chromophores. However, Chromophores are biological targets capable of absorbing a certain spectrum of light radiation, converting it into thermal energy.
Ablative lasers create light radiation whose power and wavelength are located at the peak of absorption of water. Also, Cosmetic equipment of this type is capable of instantly heating water in tissues to a temperature of 300 ºС, overcoming the ablation threshold with lightning speed.
Types of ablative effects
For a visual representation of the effectiveness of the types of ablation, we present the following table.
- Ablation types
- Depth of vaporization with adjacent coagulation zone
- Application results
- Cold 7 μm
- Scar resurfacing, removal of soft skin neoplasms
- Warm 15 μm
- Resurfacing of aesthetic defects, removal of large volumes of soft tissues
- Hot 30 μm for ablation and 70 μm for coagulation
Lifting, deep wrinkle correction, radical skin rejuvenation
Important! This division into cold, warm, and hot ablation is purely arbitrary, since all three types of exposure involve vaporization of the skin, i.e. heating its water to a temperature of 300 ºС. However, this distinction we must consider when choosing an ablative laser for Silicone face cleansing brush for sale resurfacing.
Types of ablative lasers for skin resurfacing
Three types of lasers are common to vaporize the upper layer of the skin:
- YAG - erbium laser;
- Cr: YSGG - erbium, chromium: yttrium-scandium-gallium-garnet laser;
- A CO2 laser is a carbon dioxide laser.
Each of them has its fundamental differences and is common to carry out certain procedures:
- YAG laser - for vaporization without heating the surrounding tissues;
- Also, Cr: YSGG laser - for vaporization with a small coagulation zone;
- CO2 laser - for vaporization and powerful heating of surrounding tissues.
- Thus, the most effective cosmetic equipment for facial skin resurfacing is a CO2 laser.
Features of the use of CO2 lasers for face resurfacing
Carbon dioxide CO2 laser produces light radiation with a wavelength of 10 600 nm. Furthermore, These indicators coincide with the peak of the absorption spectrum of light energy by water, which allows for instant ablation of micro-areas of the silicone face Silicone face cleansing brush for sale with the greatest depth of heating of adjacent tissues.
However, In the course of using CO2, the laser demonstrates a pronounced hemostatic (hemostatic), stimulating, and prophylactic effect. However, Equipment of this type is ideal not only for resurfacing the face but also for removing moles, papillomas, condylomas, warts, and other benign neoplasms of the skin and mucous membranes.
Effectiveness of carbon dioxide laser
At the same time, a carbon dioxide laser is effective not only for removing an aesthetic defect, but also prevents its recurrence due to the vaporization of pathogenic cells at great depths. Also, As for laser resurfacing with the use of a CO2 laser, during its implementation.
Also, it is possible to achieve an ideal leveling of the Silicone face cleansing brush for sale relief due to deep ablation of problem areas - scars, post-acne, deep wrinkles. Furthermore, after a course of procedures, the surface of the skin at the site of a scar or other aesthetic defect becomes smoother, smoother, more elastic, and practically indistinguishable in color from the surrounding tissues.
Stages of silicone face brush resurfacing
Laser face resurfacing according to the method of fractional ablative photothermolysis consists of 9 stages.
- Skin cleansing.
- Antiseptic treatment of the skin.
- Also, Applying a local anesthetic.
- Removal of residual anesthetic and re-antiseptic skin treatment.
- Moreover, Full passage of the entire skin area with a fractional nozzle.
- Second full skin passage.
- Furthermore, the third pass for correcting especially problem areas - wrinkles, folds, etc.
- Antiseptic treatment of the Silicone face cleansing brush for sale.
- Application of a regenerating agent.
Does laser skin resurfacing hurt?
The total activity of the procedure is about 60 minutes, 30 minutes of which goes directly to laser resurfacing of the face. It is not difficult to master her technique - cosmetologists of our company will always help you with this. Call us.
However, due to which the effect of thermal action is achieved and causing the vaporization of a micro-area of the skin at the point of penetration of the laser beam. In this case, it is possible to observe one of three types of ablation effects.
The correctly performed procedure does not cause severe pain. The client may experience a slight burning sensation, intense warmth, and an increasing feeling of skin tightness. Furthermore, all sensations are bearable. And to eliminate the specific odor that appears at the time of ablation of the Silicone face cleansing brush for sale, a special smoke exhauster is common.
Leave a comment